gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Radiator Hose > < Power Steering Cooler Pipe/Hose Replacement (GT4)|Page 1055
Page 9
background image

Caution:  Refer to Installing Hoses without Twists or Bends Caution   (See: Service Precautions/Vehicle Damage Warnings/Installing Hoses
without Twists or Bends Caution).

1. Route the hose in the same position the hose occupied prior to removal.

Caution:  Refer to Fastener Caution   (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).

2. Install the steering gear outlet hose to the power steering gear and tighten to 33 Nm (24 lb ft).
3. Install the power steering outlet hose to the power steering pump.
4. Lower the vehicle.
5. Bleed the power steering system. Refer to Power Steering System Bleeding   (See: Steering and Suspension/Steering/Power Steering/Power

Steering Bleeding/Service and Repair).

6. Remove the drain pan from under the vehicle.

Radiator Hose > < Power Steering Cooler Pipe/Hose Replacement (GT4)|Page 1055