Savana 3500 V8-6.0L (2007)
1. Partially install the door trim plate (2) to the door trim panel.
2. Connect the electrical connector to the door lock switch, if equipped.
3. Align the door trim plate (2) to the door trim panel
Notice: Refer to Fastener Notice.
4. Install the screw (1).
Tighten the screw that retains the front door trim plate to 1.9 N.m (17 lb in)
5. Install the inside door handle bezel.
Rear Side Door Garnish Molding Replacement
Rear Side Door Garnish Molding Replacement
Removal Procedure
1. Grasp the sliding side door upper trim panel.
Pull on the panel in order to disengage the retaining clips.
2. Inspect the sliding side door upper trim panel for broken or missing clips.
Replace the clips if needed.
Installation Procedure