Savana 3500 V8-6.0L (2007)
EGR Cooler: Service and Repair
Exhaust Gas Recirculation Cooling Pipe Replacement - Upper
Exhaust Gas Recirculation Cooling Pipe Replacement - Upper
Removal Procedure
Tools Required
J 38185 Hose Clamp Pliers
1. Remove the engine cover.
Caution: To avoid being burned, do not remove the radiator cap or surge tank cap while the engine is hot. The cooling system will release
scalding fluid and steam under pressure if radiator cap or surge tank cap is removed while the engine and radiator are still hot.
2. Drain the cooling system.
3. Reposition the EGR cooler pipe clamp (1) and remove the EGR cooler pipe hose from the EGR cooler tube.