Savana 3500 V8-6.0L (2007)
Caution: Refer to Battery Disconnect Caution.
1. Disconnect the negative battery cable.
2. Clean all the fuel pipe and hose connections and the surrounding areas before disconnecting in order to avoid possible contamination of the fuel
system.
3. Remove the fuel filler cap.
4. Drain the fuel below the level of the fuel tank fill hose. Refer to Fuel Tank Draining.
5. Raise the vehicle. Refer to Vehicle Lifting.
6. Loosen the fuel fill hose clamps (2, 3).
7. Remove the fuel fill hose (6).
8. Cap the open end of the fuel tank.
Installation Procedure
1. Uncap the fuel tank.
Notice: Refer to Fastener Notice.
2. Install the fuel fill hose (6).
Tighten the fuel fill hose clamps (2, 3) to 2.75 N.m (24 lb in).
3. Lower the vehicle.
4. Refill the fuel tank.
5. Install the fuel filler cap.
6. Connect the negative battery cable.
Fuel Hose/Pipes Assembly Replacement (Passenger/Cargo Van Fuel Tank Pipes)
Fuel Hose/Pipes Assembly Replacement (Passenger/Cargo Van Fuel Tank Pipes)
Removal Procedure
Caution: Refer to Battery Disconnect Caution.