Suburban 3/4 Ton 4WD V8-305 5.0L (1986)
Compressor Clutch Coil: Service and Repair
Removal
Fig. 3 Removing clutch coil assembly
1.
Refer to ``Compressor Clutch Rotor/Bearing'' procedure, steps 1-4 and remove pulley rotor and bearing assembly.
2.
Mark clutch coil terminal location on compressor front head.
3.
Install J-33023 puller pilot on front head of compressor. Install puller crossbar J-8433-1 with puller legs J-33025, Fig. 3.
4.
Tighten forcing screw J-8433-3 against puller pilot and remove clutch coil.
