Suburban 3/4 Ton 4WD V8-305 5.0L (1986)
Fig. 8 Exploded View Of Eaton Locking Differential. Models With 8 1/2 Inch Ring Gear
1.
Remove disc pack and shim from side gear, keeping components in order.
2.
Clean and inspect components, and replace any that are damaged, deformed or excessively worn. If side gear must be replaced, refer to SIDE
GEAR SHIM SELECTION for shim selection prior to case assembly. If side gear hub is scored or worn, inspect bore in case and replace
assembly if bore is damaged or worn.
3.
Alternately assemble eared discs and splined discs on side gear hub, starting with eared disc as shown in Fig. 8.
4.
Install original shim or replacement shim of same thickness if original side gear is being used.
