Suburban 3/4 Ton 4WD V8-305 5.0L (1986)
If you have previously encountered these conditions and paid for all or part of the repairs, you should contact your Chevrolet dealer, who will advise you
with regard to obtaining reimbursement. You should present the dealer with your original paid receipts or invoices verifying expenses incurred for such
repairs.
We suggest you retain this letter and store it in the glove compartment, along with the Owner's Manual, Maintenance Guide, and Warranty Folder.
The enclosed Owner Reply Card identifies your vehicle. Presenting the card to your dealer will assist in completing the services in the shorttest possible
time. If you have sold or traded your vehicle, please complete the postage-paid card and return it to us. This will assist us in notifying other affected
owners.
Chevrolet is taking this action in the interest of your continued satisfaction with our products.
Installation of Moisture Deflector Shield
Installation of Moisture Deflector Shield
1.
Remove cap and retainer from fluid reservoir.
2.
With notch of deflector hole positioned toward rear of vehicle, tuck deflector under the lip of the fender as shown in illustration.
NOTE:
Failure to install deflector as instructed will not provide adequate moisture protection for pump.
3.
Slip hole in deflector over neck of reservoir, then reinstall retainer and cap.
4.
Complete "Owner Reply Card" and return to Chevrolet.
