Terrain FWD L4-2.4L (2010)
15. When the programming event has completed, the radio will display Download Complete and the version number U413.
Note
On the SRX, the display screen will rise at the completion of the USB download to allow viewing of the programming complete screen and
version number.
16. Turn OFF the ignition for 60 seconds.
17. Remove the USB flash drive.
18. The vehicle MUST now be calibrated.
Note
Vehicle calibration is a required step. Many of the radio and navigation functions will not operate properly unless the calibration outlined in the
following steps is performed.
Note
After completion of the USB programming event, but prior to the initialization of SPS programming, the radio will display a Cadillac splash
screen if operated. This is a normal condition. Completion of the SPS programming below will restore the radio to the proper splash screen for the
vehicle being serviced.
19. Return to the SPS programming screen. Select J-2534 MDI from the Select Diagnostics Tool and Programming Process screen.
20. Select RAD: Radio Programming.
21. You must now select the proper choices for the build of the vehicle you are servicing. Refer to the vehicle SPID label or the vehicle build
information through GWM for the specific RPOs the vehicle is equipped with.
22. Once you have selected the proper vehicle options, you may initiate SPS programming. Upon completion of this step, the radio is updated.
Note
At the completion of the programming, you may verify the programming is updated and successful by pressing CONFIG, entering NAV and then
viewing the map database. You should see version U413 displayed.
Note
The navigation radio will be returned to factory default value during this upgrade.
Warranty Transaction Information
Submit a claim using the table below.
* USB Flash Drives were sent to involved U.S. dealers at no charge from the WPC. If dealers no longer have that flash drive, they are to purchase one at
their expense. Do NOT submit for the cost of a USB flash drive.
** Submit the actual cost of the USB 2.0 Flash Drive, not to exceed $10.00 USD, $10.30 CAD. The calibration downloaded to the USB Flash Drive can
be used to program all vehicles involved in the field action. After completing the programming event for all vehicles involved in the field action, remove
(delete) the calibration from the USB Flash Drive. Save the USB Flash Drive for future USB programming events.
