Yukon Denali AWD V8-6.2L (2007)
12. Remove the nuts (2) from the HVAC module (3).
13. Remove the bolts (1) from the HVAC module (3).
14. Remove the HVAC module (3).
INSTALLATION PROCEDURE
1. If replacing the HVAC module, transfer the components from the old HVAC module as necessary.
2. Install the HVAC module (3).
3. NOTE: Refer to Fastener Notice.
Install the nuts (2) to the HVAC module (3).
Tighten the nuts to 9 N.m (80 lb in).
4. Install the bolts (1) to the HVAC module (3).
