Yukon XL 2500 2WD V8-8.1L VIN G (2004)
8. if equipped, install the oil pan skid plate and bolts.
Tighten the oil pan skid plate bolts to 20 Nm (15 ft. lbs.).
9. Install the engine mount heat shield.
10. Install the engine mount-to-engine mount bracket bolts.
Tighten the engine mount-to-engine mount bracket bolts to 65 Nm (48 ft. lbs.).
11. Install the wheelhouse inner panel (1).
12. Install the wheelhouse inner panel push pin retainers (2).
13. Install the left front tire and wheel. Refer to Tire and Wheel Removal and Installation in Wheels, Tires and Alignment.
14. Lower the vehicle.