Yukon XL 2500 2WD V8-8.1L VIN G (2004)
Axle Shaft: Service and Repair
(8.6 Inch Axle W/JL4)
Rear Axle Shaft Replacement (8.6 Inch Axle W/JL4)
^
Tools Required
-
J 2619-01 Slide Hammer
-
J 45859 Axle Remover
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting in Service Precautions.
2. Remove the tire and wheel assembly.
3. Remove the brake caliper.
4. Remove the rear wheel speed sensor.
5. Remove the rear cover and the gasket.
6. Remove the pinion shaft locking bolt.
7. Remove the pinion shaft.