Accord L4-1955cc 2.0L SOHC 2-bbl (1986)
Brake Rotor/Disc: Service and Repair
NOTE: The Kwik-Lathe produced by Kwik-Way Manufacturing Co. and the "Front brake disc lathe" offered by Snap-on Tools Co. are approved for
this operation.
NOTE: If rotor is not serviceable, replace using the following steps.
Caliper Removal And Installation
1. Remove brake hose clamp from the steering knuckle.
2. Remove the caliper bolt, then remove the caliper.
3. Remove the caliper bracket.
4. Remove and replace rotor.
5. Reverse steps outlined above to reassemble.
For additional information see Installation Notes. See: Fundamentals and Basics