Accord L4-1955cc 2.0L SOHC 2-bbl (1986)
Control Unit Fluid Lines
3. Connect the fluid lines to the control unit.
A: From pump 14 mm wrench 38 Nm (3.8 kg-m, 28 ft-lbs).
B: To speed sensor 12 mm wrench 13 Nm (1.3 kg-m, 9 ft-lbs).
C: From speed sensor 12 mm wrench 13 Nm (1.3 kg-m 9 ft-lbs).
D: To reservoir 17 mm wrench 29 Nm (2.9 kg-m, 20 ft-lbs).
Header Pipe
4. Install the header pipe with new gasket, and tighten the bolts and nuts.
Center Beam
5. Install the center beam and tighten the bolts.