Accord L4-1955cc 2.0L SOHC FI (1987)
4.
Apply a liberal amount of 3M Black Super Silicone Sealant (P/N:08664), or equivalent, to the underside of the upper windshield molding. Do not
apply sealant over the clips; sealant may interfere with the clip's locking action.
CAUTION: Do not use an adhesive-type sealant. An adhesive may cause damage to the molding if the molding is to be removed at a later time.
5.
Clip the upper windshield molding in place by tapping it down onto its clips, and then reinstall the side moldings.
WARRANTY CLAIM INFORMATION
Operation number:
831000
Flat rate time:
0.8 hour Failed part H/C: Accord H/C 218645 Prelude H/C 212354
Defect code:
042
Contention code:
B07