Accord L4-2.2L SOHC VTEC (1994)
Heater Control Panel Assemble
12.
Place the new circuit board in position. Place the rear cover in position on the circuit board. Push down evenly on the rear cover to snap the circuit
board and rear cover into place.
13.
Reinstall the five screws removed in steps 10 and 11. Install the light bulb socket. Make sure the light bulb wires are properly routed so they will
not get pinched.
14.
Reinstall the heater control panel in the instrument panel.
15.
Reinstall the instrument panel and switches.