Accord L4-2.2L SOHC VTEC (1994)
Air Mix Controls
16.
Reconnect the air mix control cable end to the arm. Push on the air mix control arm to make sure the air mix doors are closed; then pull back on
the air mix control outer cable to remove the slack in the inner cable, and snap the outer cable into the retaining clip.
17.
Reinstall the radio, front console, and rear console.
18.
Reconnect the battery. Enter the anti-theft code in the radio (if needed) and the customer's presets. Set the clock.
19.
Verify that all the heater control panel lights and controls work correctly.
PARTS INFORMATION
Heater control panel circuit board:
P/N 79621-SV4-999, H/C 4728085
