Accord L4-2.4L (2005)
Front Door Panel: Service and Repair
Coupe
Door Panel Removal/Installation
Special Tools Required
-
KTC trim tool set SOJATP2014
-
Trim pad remover. Snap-on A 177A or equivalent, commercially available
2-door
NOTE: Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
1. Lower the glass fully.
2. Using a trim tool, pry out on the lower portion of the cover (A) to release the hooks (B, C), then remove the cover and the screws.
3. Remove the power window switch panel (A).
1. Insert a flat-tip screwdriver wrapped with protective tape through the hole under the armrest, and push up the bottom of the power window
switch (B) to release the panel.
2. Pull out along the edge of the panel to release the hook (C) and clips (D).
3. Disconnect the power mirror switch connector (E) (driver's) and the power window switch connector (F).
4. Remove the screws (G) from under the armrest.
5. Remove the mirror mount cover.