Accord L4-2.4L (2005)
4. Remove the screw from under the pull pocket cap (A).
5. Remove the mirror mount cover.
6. Remove the door panel (A) with as little bending as possible to avoid creasing or breaking it.
1. Start at the bottom edge of the door panel, release the clips that are just above the marks (B) on the edge of the panel with a commercially
available trim pad remover (C).
2. Detach the upper clips.
3. Starting at the rear, pull the door panel upward and over the lock knob (D).
NOTE: The inner handle cable (E) and the courtesy light bulb socket (F) are connected to the door panel. Do not pull the door panel up too
far, or the inner handle cable will be damaged.
7. While holding the door panel (A) away from the door, disconnect the inner handle cable (B), and if equipped, courtesy light bulb socket (C), and
detach the harness clip (D), then remove the panel. If necessary, remove the inner handle (E) by releasing the hooks (F, G).