Accord L4-2.4L (2005)
![background image](/honda/accord/l4-2.4l/Page-2218001.png)
Fuel Door Release Cable: Service and Repair
Trunk Lid Opener Cable/Fuel Fill Door Opener Cable Replacement
2-door
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before performing repairs or service.
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to scratch the body and related parts.
1. Remove these items form the left side of the vehicle:
-
Door sill trim
-
Side trim panel
-
Trunk rear trim panel
-
Trunk side trim panel, left side
2. Pull the carpet back as necessary.
3. Detach the clip (A) with a clip remover, and release the opener cable (B) from the clip (C).
4. Release the fuel fill door/trunk lid opener cable (A) from the clip (B). Remove the fuel fill door latch (C) by turning it 90 °, and detach the opener
cable junction box (D) from the body.