honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Fuel Door Release Cable|Service and Repair|Page 7218 > < Fuel Door Release Cable|Service and Repair
Page 2
background image

5. Disconnect the trunk lid opener cable from the trunk lid latch (E).
6. Release the fuel fill door opener cable/trunk lid opener cable from the clips (G).
7. Remove the trunk lid opener/fuel fill door opener cable from the vehicle. Take care not to bend or kink the cable.

8. Install the opener cable in the reverse order of removal, and note these items:

-

Route the opener cable (A) beside the floor wire harness clips (B) correctly.

-

Align the marks (C) on the cable with the cable clips (D) as shown.

-

Replace any damaged clips.

4-door

SRS components are located in this area. Review the SRS component locations and the precautions and procedures before performing repairs or service.

NOTE:

-

Put on gloves to protect your hands.

-

Take care not to scratch the body and related parts.

1. Remove these items from the left side of the vehicle:

-

Front door sill trim 

-

Rear door sill trim 

-

B-pillar lower trim, without side curtain airbags, with side curtain airbags

-

Left rear seat side bolster 

-

Trunk rear trim panel 

-

Trunk side trim panel, left side 

Fuel Door Release Cable|Service and Repair|Page 7218 > < Fuel Door Release Cable|Service and Repair