Accord L4-2.4L (2005)
License Plate Frame: Service and Repair
Rear License Trim Replacement
'03-06 Models 2-door
1. On the inside of the trunk lid, remove the nuts (A), and release the clips (B, C, D), then remove the rear license trim (E). Take care not to scratch
the trunk lid.
2. Install the trim in the reverse order of removal, and check the clips for damage or stress-whitening, and replace them with new ones.
'06 Model 4-door
NOTE: Put on gloves to protect your hands.
1. Remove the trunk lid trim .
2. From inside the trunk lid, disconnect back-up connectors (A), then remove the nuts.