Accord L4-2.4L (2005)
9. Two-piece type: Release the clips (A) fastening the front carpet (B) and rear carpet (C). One-piece type: Release the clip (A) from middle of the
carpet (D).
10. Release the hooks (E) with a flat-tip screwdriver-push the screwdriver toward the door, then lift upward. Remove the fastener (F), and then remove
the carpet (one-piece type) or the front and rear carpets (two-piece type).
11. Install the carpet(s) in the reverse order of removal, and note these items:
-
Take care not to damage, wrinkle or twist the carpet.
-
Make sure the seat harnesses are routed correctly.
-
Replace the clip if it is damaged.
With side curtain airbags:
-
Reconnect the negative cable to the battery.
-
Enter the anti-theft codes for the radio and the navigation system, then enter the customer's radio station presets.
-
Reset the clock.