honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Trim Removal/Installation - Door Area|Page 7500 > < Trim Removal/Installation - Door Area|Page 7498
Page 3
background image

1. Left side: Remove the footrest.
2. Left side: Remove the front side cap from the front door sill trim, and remove the opener lock cylinder and bolt 

3. Detach the hooks (A) and tabs (B) from the kick panel (C) and B-pillar lower trim (D), and pull the front door sill trim (E) up by hand to detach

the clips (F) or (G), then remove it.

4. Disconnect the trunk lid opener/fuel fill door opener cable (H) from the opener (I).
5. If necessary, pull the front side outer trim (J) up to detach the clips (K), then remove the trim.

6. Remove the left kick panel (A) or the right kick panel (B).

1. Pull out the door opening trim (C) as needed from the kick panel hooks (D) and the door opening flange.
2. Left side: Pull the hood release handle, and hold it.
3. Pull the kick panel back by hand to detach the clips (E, F, G), then remove it.

Trim Removal/Installation - Door Area|Page 7500 > < Trim Removal/Installation - Door Area|Page 7498