Accord L4-2.4L (2005)
7. Pull out the front door opening trim (A) from the trim hooks (B) and around the front door opening flange, then remove the trim.
8. Install the trim in the reverse order of removal, and note these items:
-
Check the clips for damage or stress-whitening, and replace them with new ones.
-
Push the clips and hooks into place securely.
-
Make sure the trunk lid opener/fuel fill door opener cable is connected securely
Special Tools Required
KTC trim tool set SOJATP2014
4-door - Rear Door Sill Area
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to bend or scratch the trim and panels.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
1. Detach the hook (A) and tab (B) from the B-pillar lower trim (C), and pull the rear door sill trim (D) up by hand to detach the clips (E), then
remove it.
2. If necessary, pull the rear side outer trim (F) up to detach the clips (G), then remove the trim.