Accord L4-2.4L (2005)
KTC trim tool set SOJATP2014
2-door-C-pillar - Without Side Curtain Airbags ('03-04 models)
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to bend or scratch the trim and panels.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
1. Remove the rear seat cushion.
2. Remove the rear seat belt lower anchor bolt.
3. Left side: Pull the coat hanger (A) down, and remove the coat hanger cover (B) by releasing the hook (C), then remove the screw (D). Right side:
Remove the right C-pillar cap (E) by releasing the hooks (F), then remove the screw (G).