Accord L4-2.4L (2005)
![background image](/honda/accord/l4-2.4l/Page-2370001.png)
Seat Cover: Service and Repair
Front Seat Cover
Front Seat Cover Replacement
-
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before performing repairs or
service.
-
'04-05 models: The operation of the driver's seat position sensor must be checked after any of these actions:
-
Driver's seat position sensor replacement
-
Cover plate (front side of driver's seat slide rail) replacement
-
'04-05 models: The front passenger's weight sensor (SWS) unit must be calibrated after any of the these actions:
-
Front passenger's seat replacement (including any seat components)
-
Replacement of the seat weight sensors
-
Replacement of the seat weight sensor unit
NOTE:
-
With side airbag: Seats with a side airbag have a "SIDE AIRBAG" label on the seat-back. Because the component parts (seat-back cover, cushion,
etc.) of seats with and without airbags are different, make sure you install only the correct replacement parts.
-
With side airbag: Do not repair any tears or frayed spots of the seat-back cover. If necessary, replace the seat-back cover.
-
Take care not to tear the seams or damage the seat covers.
-
On the passenger's seat with side airbag, do not touch the OPDS sensor in the seat-back pad, and keep it away from oil. Oil can corrode the sensor
causing it to fail.
-
Put on gloves to protect your hands.
Seat-back Cover
1. Remove the front seat.
2. Remove the headrest.