Accord L4-2.4L (2005)
3. With recline motor and/or side airbag: From under the seat cushion, disconnect the recline motor connector (A), and if equipped, the seat-back
heater connector (B) on the driver's 8-way power seat. Detach the side airbag connector clip (C), the OPDS unit connector clip (D) on the
passenger's seat, and harness clips (E). Release the hook springs (F) (on some driver's seat) and seat cushion cover (G) from the seat cushion frame
spring (H), release the hook strips (I) on 2-door passenger's seat, then pull the cover back, and remove the wire ties (J). The manual height
adjustable seat is similar to the 2-way power seat.
4. Remove these items from the front seat, then remove the seat-back, '03 model 2-door manual seat, '04-05 models 2-door manual seat, '03 model
4-door manual seat, '04-05 models 4-door manual seat, manual height adjustable seat, 2-way power-seat, 8-way power seat:
-
Recline cover
-
Center cover
5. Remove the screws (A, B), then remove the rear seat access knob (C), and rear seat access trim (D).
6. If equipped with a lumbar support, remove the clip (A), then remove the lumbar support handle (B).