Accord L4-2.4L (2005)
3. Disconnect the side impact sensor (2nd) 2P connector (A) from the side curtain airbag subharness.
4. Remove the Torx bolts (B) using a Torx T30 bit, then remove the side impact sensor (2nd) (C).
Installation
1. Install the new side impact sensor (2nd) (A) with torx bolts (B), then connect the side curtain airbag subharness 2P connector (C) to the side
impact sensor (2nd).
2. Reconnect the battery negative cable.
3. Install all removed parts.
4. After installing the side impact sensor (2nd), confirm proper system operation: Turn the ignition switch ON (II); the SRS indicator should come on
for about 6 seconds and then go off.