Accord L4-2.4L (2005)
6. Remove the center anchor bolt (A) and detach the harness clip (B), then remove the seat belt buckle (C).
7. Pull the seat belt switch harness (D) out through the space between the seat cushion and the seat linkage (except manual seat), or through the hole
in the seat track (manual seat).
8.
Install the buckle in the reverse order of removal, and note these items:
-
Assemble the washers on the center anchor bolt as shown.
-
Move the seat all the way forward and backward and confirm that the seat buckle harness is routed properly.
-
Reconnect the negative cable to the battery.
-
Enter the anti-theft codes for the radio and the navigation system, then enter the customer's radio station presets.
-
Reset the clock.
-
Perform the power window control unit reset procedure.
Passenger's Seat Belt Lower Anchor - '04 Model
1. Make sure you have the anti-theft codes for the radio and the navigation system, then write down the frequencies for the radio preset buttons.
2. Disconnect the negative battery cable, and wait at least 3 minutes before beginning work.
3. Remove the front seat.