Accord L4-2.4L (2005)
![background image](/honda/accord/l4-2.4l/Page-2705005.png)
15. With a sponge, carefully apply a light coat of body primer to an / exposed paint or metal around the flange where new adhesive will be applied.
Let the primer dry for at least 10 minutes:
-
Do NOT apply body primer to any remaining original adhesive on the flange.
-
Be careful not to mix up the body and glass primer sponges.
-
Never touch the primed surfaces with your hands.
16. Cut a "V" in the end of the nozzle (A) on the adhesive cartridge as shown.
17. Pack adhesive into the cartridge without air pockets to ensure continuous delivery. Put the cartridge in a caulking gun, and run a bead of adhesive
(A) around the edge of the front seal (B) and molding .(C) as shown. With the glass primer (D) you applied in step 14 on the quarter glass (E) as a