Accord V6-3.0L Hybrid (2005)
Front Door Exterior Handle: Service and Repair
Front Door Outer Handle Replacement
NOTE: Put on gloves to protect your hands.
1. Remove these items:
-
Door panel
-
Plastic cover, as needed
2. Raise the glass fully.
3. Pull the glass run channel (A) away as needed, and remove the bolt, then remove the center lower channel (B) by pulling it downward.
4. Remove the maintenance cap (A), then disconnect the outer handle rod (B), and cylinder rod (C).
5. Driver's: Remove the maintenance cap (A) from the rear of the door, then loosen the screw securing the lock cylinder protector (B) and the outer
handle (C).