honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Air Mix Control Motor Test|Page 5545 > < Air Mix Control Motor Test|Page 5543
Page 2
background image

YES - Repair any short to body ground in the wire(s) between the climate control unit and the recirculation control motor.

NO - Go to step 9.

9. Turn the ignition switch ON (II), and check the same wires for voltage.

Is there any voltage?

YES - Repair any short to power in the wire(s) between the climate control unit and the recirculation control motor. This short also damages the
climate control unit. Repair the short to power before replacing the climate control unit.

NO - Go to step 10.

10. Turn the ignition switch OFF, and check for continuity between the following terminals of the climate control unit 20P connector and the

recirculation control motor 7P connector.

Is there continuity?

YES - Check for loose wires or poor connections at the climate control unit 20P connector and at recirculation control motor 7P connector. If the
connections are good, substitute a known-good climate control unit, and recheck. If the symptom/indication goes away, replace the original climate
control unit.

NO - Repair any open in the wire(s) between the climate control unit and the recirculation control motor.

11. Remove the recirculation control motor.
12. Check the recirculation control linkage and doors for smooth movement.

Do the recirculation control linkage and doors move smoothly?

YES - Replace the recirculation control motor.

Air Mix Control Motor Test|Page 5545 > < Air Mix Control Motor Test|Page 5543