Accord EX Coupe V6-3.0L (2001)
Shifter A/T: Service and Repair
Removal and Installation
Removal
1. Shift the transmission into R position.
2. Remove the center console.
3. Remove the nut securing the shift cable end (A), then separate the shift cable end from the shift lever assembly.
4. Rotate the socket holder (A) on the shift cable (B) counterclockwise a quarter turn, then slide the holder to remove the shift cable from the shift
lever bracket base (C).
NOTE: Do not remove the shift cable by twisting the shift cable guide pipe (D).
5. Disconnect the shift lock solenoid connector (A) and park pin switch 4P connector (B).
6. Remove the four bolts (C) securing the shift lever bracket base, then remove the shift lever assembly.
Installation
1. Install the shift lever assembly.