Accord EX Coupe V6-3.0L (2001)
![background image](/honda/accord_ex_coupe/v6-3.0l/Page-1231002.png)
2. Turn the ignition switch ON (II), and verify that the R position indicator comes on.
3. If necessary, push the shift cable until it stops, then release your hand. Pull the shift cable back one step so that the shift position is in R
4. Turn the ignition switch OFF.
5. Insert a 6.0 mm (0.24 inch) pin (A) into the positioning hole (B) on the shift lever bracket base through the positioning hole on the shift lever
assembly.