Accord Wagon EX L4-2156cc 2.2L SOHC (VTEC) MFI (1997)
NOTE:
-
If the thicknesses of 2nd gear and the spacer are less than the standard, replace them with new ones.
-
If the thicknesses of 2nd gear and the spacer are within the standard, replace the 1st/2nd synchro hub with a new one.
COUNTERSHAFT ASSEMBLY DISASSEMBLE
1. Securely clamp the countershaft assembly in a bench vise with wood blocks.
2. Raise the locknut tab from the groove in the countershaft, then remove the locknut and the spring washer.
3. Remove the ball bearing using a press as shown.