Civic DX Coupe L4-1590cc 1.6L SOHC MFI (1999)
Paint: Service and Repair
Soft Chipping Guard Primer Coat
Repair Material and Tools
Repair Materials and Tools
WARNING:
-
Most paints contain substances that are harmful if inhaled or swallowed. Read the paint label before opening the container.
-
Spray paint only in a well ventilated area.
-
Cover spilled paint with sand, or wipe it up at once.
-
Wear an approved respirator, gloves, eye protection and appropriate clothing when painting. Avoid contact with skin.
-
If paint gets in your mouth or on your skin, rinse or wash thoroughly with water. If paint gets in your eyes, flush with water and get
prompt medical attention.
-
Paint is flammable. Store it in a safe place, and keep it away from sparks, flames or cigarettes.
Coating Procedures
Coating Procedures
NOTE: This section covers the application of the soft chipping primer to the replacement part.
1. Sanding the replacement part
WARNING: Wear goggles or safety glasses to prevent eye Injury.
Sand the area to be painted with
#240-#400 sandpaper.
NOTE:
-
Do not oversand the edges or corners of the part.
-
Do not expose bare metal.
2. Air blowing/degreasing
WARNING:
-
Do not use high air pressure; use only an approved, 210 kPa (2.1 kgf/sq.cm, 30 psi) air nozzle.
-
Wear goggles or safety glasses to prevent eye injury.
-
Paint thinner is flammable. Store it in a safe place, and keep it away from sparks, flames or cigarettes.
Clean the surface with compressed air and wax and grease remover.
3. Masking
-
Place masking tape or paper around the surface to be painted.
-
Cover as wide an area as possible with tape or paper to keep primer from spreading.