CR-V LX 4WD L4-2.4L (2002)
2. Carefully move the steering gearbox toward the passenger's side until the pinion shaft clears the wheel well opening on the frame. Continue
moving the gearbox toward the passenger's side until the steering gearbox is in position.
NOTE: Make sure the power steering return hose is routed between the gearbox and right tie-rod.
3. Install the pinion shaft grommet (A).
4. Install the mounting cushion on the cylinder side of the gearbox.
5. Insert the pinion shaft up through the bulkhead, and place the steering gearbox on the mounting brackets. Be sure that the pinion shaft grommet is
in place securely.
6. Loosely install the two 10 mm flange bolts and washers on the left side of the gearbox.