CR-V LX 4WD L4-2.4L (2002)
7. Position the cutout (A) on the mounting cushion (B) as shown, and install it on the housing of the gearbox. Install the mounting bracket (C) over
the mounting cushion.
8. Install the 10 mm flange bolt and nut loosely first, then torque the flange bolt and nut alternately in two or more steps.
9. Tighten the left side flange bolts to the specified torque value.
10. On the driver's side, connect the feed line (A), and tighten the 14 mm flare nut to specified torque.
11. Install the P/S return line bracket (B), then install the feed line clamps (C). Tighten the mounting bolts to the specified torque.