CR-V SE 4WD L4-1972cc 2.0L DOHC MFI (2001)
Constant Velocity Joint: Service and Repair
DISASSEMBLE
1. Remove the set ring from the inboard joint.
2. Carefully clamp the driveshaft in a vise with soft jaws. To remove the boot band, pry up the locking tabs with a screwdriver and raise the end of
the band. Take care not to damage the boot.
NOTE:
-
If the boot band is the welded type, carefully cut it off with a pair of diagonal cutters.
-
If the boot band is a double loop type, raise the band bend as shown.