Cruise Control: Adjustments
- Make
- Honda
- Model
- CRX Si
- Engine
- L4-1590cc 1.6L SOHC (D16A6) MFI
- Year
- 1988
- Section
- Adjustments
Cruise ControlAdjustments
_mfi/Page-741001.png)
Cruise Control: Adjustments
Fig. 42 Cruise control actuator cable adjustment
ACTUATOR CABLE ADJUSTMENT
Check actuator cable for smoothness of operation.
1.
Start engine, then measure actuator rod travel until the cable moves accelerator lever, increasing engine speed. This distance should be between
.37 to .49 inch, Fig. 42.
2.
If actuator rod movement is not within limits, by loosen lock nut and turn adjusting nut until specified travel is obtained.
3.
After completing adjustment, tighten lock nut.
Pinch or Ctrl + scroll to zoom. Double-tap to reset.
Parts & tools for this job For 1988 Honda CRX 1.6L
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Honda CRX
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.