Fit L4-1.5L (2008)
4. Install the wheel sensor harness clip (G).
5. Raise the front suspension with a floor jack to load the suspension with the vehicle's weight.
6. Tighten the damper pinch bolts and new flange nuts to the specified torque value while holding the damper pinch bolt with a wrench.
7. Install the stabilizer link to the damper and tighten to the specified torque value.
8. Hold the damper shaft (A), and with a hex wrench (B), tighten the 12 mm nut to the specified torque value.
9. Install the cap (C) to the top of the damper.
10. Clean the mating surface of the brake disc and the inside of the wheel, then install the front wheels.
11. Check the wheel alignment, and adjust it if necessary.
Rear Suspension
Spring Replacement
