Odyssey L4-2.2L SOHC (1995)
Fuel Tank Sending Unit
3.
Remove the access cover (three screws). Disconnect the 3-P connector from the sending unit.
4.
Remove the five mounting nuts. Remove the sending unit from the tank.
5.
Install the new sending unit.
6.
Reconnect the 3-P connector and install the access cover.
7.
Reinstall the carpet and seats.
Service Advisor:
Notify the customer that the pointer will rise only to the bottom edge of the "F" mark when the tank is full and that, after a fill-up, the gauge may take up
to five minutes for the pointer to reach the "F" mark.
PARTS INFORMATION
Fuel gauge sending unit:
P/N 37800-SX0-023, H/C 4724795
WARRANTY CLAIM INFORMATION
In warranty:
The normal warranty applies.
Out of warranty:
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Service Manager or your Zone Office. You
must request consideration, and get a decision, before starting work.
Operation number:
310125
Flat rate time:
0.6 hour
Failed part:
P/N 37800-SXO-003
H/C 4621595
Defect code:
039
Contention code:
B99