Odyssey EX L4-2253cc 2.3L SOHC (VTEC) MFI (1998)
Seat Belt: Service and Repair
Front Seat Belt Buckle
Seat belt buckle removal
1. Remove the center cover from the front seat1.
2. Driver's seat: Disconnect the seat belt switch connector, then detach it from the seat cushion frame.
3. With a 17 mm socket or box-end wrench. remove the center anchor bolt, then remove the seat belt buckle.
4. Installation is the reverse of the removal procedure.
NOTE: Make sure you assemble the washers and bearing on the center anchor bolt as shown.