Odyssey EX V6-3.5L (1999)
30. Grease the steering rack teeth, then insert the steering rack into the gearbox housing. Be careful not to damage the inner surface of the cylinder
wall with the rack edges.
31. Insert a deep socket wrench (A) onto the steering rack as shown.
32. Install the cylinder and seal (B) into the bottom of the cylinder by pressing on the tool with a press. Do not push on the tool with excessive force as
it may damage the cylinder end seal.
33. Remove the tool, and center the steering rack.
34. Wrap vinyl tape around the rack end edges, and coat the surface of the tape with power steering fluid. Make sure that the vinyl tape is wrapped
carefully so there is no stepped portion.