Odyssey EX V6-3.5L (1999)
35. Coat the inside surface of the new cylinder end seal (A) with power steering fluid, then press it into the rack bushing (B) using the special tools.
36. Coat the new O-ring (C) with power steering fluid, and carefully fit it in the groove of the rack bushing.
37. Install the rack bushing onto the steering rack with cylinder end seal grooved side toward the piston. Push in the rack bushing with your finger.
38. Remove the vinyl tape from the steering rack, then remove any adhesive residue.
39. Install the rack stop (A) onto the steering rack so the hole (B) is aligned with the slot (C) on the steering rack.