Passport LX 2WD V6-3.2L SOHC (6VD1) (1997)
![background image](/honda/passport_lx_2wd/v6-3.2l_sohc_(6vd1)/Page-571001.png)
Valve Cover: Service and Repair
Right Hand Side
REMOVAL
NOTE Remove battery ground cable.
1. Common chamber
2. Ventilation hose
-
Disconnect from cylinder head cover.
3. Ignition coil connector and Ignition coil
-
Disconnect three connectors from ignition coil.
-
Remove harness bracket bolts on cylinder head cover.
-
Remove fixing bolts on ignition coil.
4. Ground cable
-
Remove fixing bolt on cylinder block.
5. Fuel hose
-
Disconnect feed and return hoses from fuel pipes.
-
Remove two fuel hose fixing bolts on the cylinder head cover.
6. Engine hanger
-
Remove heat protector on exhaust manifold. Remove bolts and nuts that secure the hanger to the exhaust manifold and cylinder head.
7. Heater pipe
-
Remove heater pipe fixing bolts from the bracket.
8. Cylinder head cover
-
Remove 11 fixing bolts, then the cylinder head cover.