Passport LX 2WD V6-3.2L SOHC (6VD1) (1997)
![background image](/honda/passport_lx_2wd/v6-3.2l_sohc_(6vd1)/Page-1883001.png)
Alternator: Service and Repair
Disassembly and Reassembly/Overhaul
DISASSEMBLY
1. Through bolt
^
Remove the through bolt.
^
Insert the tip of a pry bar into the gaps between the front cover and the stator core. Pry apart and separate the front cover and rotor and the rear
cover and stator.
CAUTION: Take care not to scratch or otherwise damage the stator coil with pry bar.
2. Pulley nut and washer
^
Clamp the rotor in a vise and then remove the nut and washer.
3. Pulley
4. Rotor assembly
^
Remove the rotor assembly from front cover.
5. Screw
6. Bearing retainer
7. Front bearing
8. Front cover
9. Nut