honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Removal and Installation/Replacement|Page 6052 > < Removal and Installation/Replacement|Page 6050
Page 2
background image

10. Rear cover

^

Remove the mounting nuts holding the BAT terminal, the diode, and the brush holder.

^

Separate the rear cover from the stator.

11. Stator

^

Remove bolts which secure stator terminal to Diode terminal, and remove stator.

12. Bolt
13. Condenser
14. Bolt
15. IC regulator
16. Brush-Holder
17. Packing
18. Diode bridge

19. Bolt

^

Remove Bolts which secure IC Regulator, Diode, Condenser and Brush-Holder, and separate these parts.)

NOTE:
^

Do not apply a shock or load to IC Regulator, Diode, Condenser and cooling fins.

REASSEMBLY

To reassemble, follow the disassembly steps in the reverse order, noting the following point;

NOTE:

1. NEVER make battery connections with polarities reversed, or battery will be shorted via the diodes.

Removal and Installation/Replacement|Page 6052 > < Removal and Installation/Replacement|Page 6050