Passport LX 4WD V6-3.2L DOHC (6VD1) (2000)
Trunk / Liftgate Lock Cylinder: Service and Repair
Hatchgate Lock
Tailgate Lock and Hatchgate Lock (LWB)
Removal
1. Disconnect the battery ground cable.
2. Remove the tailgate trim cover assembly (3).
-
Remove the 2 screws (2) holding the hatch gate lock assembly (1) first, and pull up the trim cover while detaching the clips from tailgate panel.
3. Remove the waterproof sheet.
-
Remove the waterproof sheet, taking special care so as not to break it.
4. Remove the hatchgate lock.
-
Disconnect the lock link and connector and remove the 3 fixing bolts.
5. Remove the key cylinder.
-
Disconnect the lock links.
-
Remove the key cylinder retaining clip with screw driver to remove the key cylinder.
6. Remove the hatchgate lock actuator assembly.
-
Disconnect the actuator harness connector.
-
Remove the 2 bolts holding hatchgate lock actuator assembly from inside.
7. Remove the outside handle.
-
Remove the 2 bolts holding the outside handle from inside.