Passport LX 4WD V6-3.2L DOHC (6VD1) (2000)
8. Remove the tailgate lock assembly.
-
Remove the 3 screws holding the lock assembly.
Installation
To install, follow the removal steps in the reverse order, noting the following points:
1. When setting up links, pay attention to the position and direction of the links.
2. Apply chassis grease to the lock assembly and striker moving surface.
3. Check that the tailgate lock operates correctly after installing it.
4. Tighten the hatchgate lock assembly fixing bolts to the specified torque.
Torque 7 Nm (61 lb in)